







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose PGT Construction
We provide independent PGT construction service in Pasadena: window and door repair, replacement, installation, and the surrounding construction work that often comes with it. We work on PGT windows and doors every week across Pasadena and the San Gabriel Valley, so we know how the WinGuard and Architectural lines actually behave in this climate. That means we can tell you which glazing seals fail here, which rollers wear out, and which install details cause callbacks.
PGT is a manufacturer of impact-rated and energy-efficient windows and doors. We are an independent PGT service provider. We are not affiliated with, authorized by, or certified by PGT, and we don’t present ourselves as a dealer. What we offer is hands-on familiarity with the product plus a full residential construction bench behind it. A Pasadena homeowner with failing sliders often needs siding repaired, a roofline checked, or a kitchen opened up at the same time. One contractor relationship covers all of it. Call (844) 905-4587 for a free estimate. We answer 24/7.
Why Trust Construction Pasadena for Your PGT Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent on PGT units in San Gabriel Valley housing stock, from Craftsman bungalows to mid-century tract homes. We know the profile shapes, the hardware that fits them, and the small install tolerances that decide whether a unit seals properly or leaks two winters later.
Because we’re independent, we quote repair and replacement on what your PGT units need, not on what a manufacturer program rewards. Nobody is steering us toward a full replacement when new rollers and a sweep will do the job. We use OEM PGT hardware where it’s still available, because the frame profiles are proprietary and aftermarket rollers and latches tend to bind or fail early. When we do recommend repair, the work is done so it doesn’t void a warranty you may still hold: we don’t modify frames, we don’t drill new drainage paths, and we don’t substitute hardware that changes how the unit operates. We also pull permits when Pasadena requires them, which matters here more than in most of the valley.
That last point is worth spelling out. In neighborhoods like Bungalow Heaven and Prospect Park, the city’s historic district overlay means even a window replacement or a fence repair may require a Certificate of Appropriateness from the Design Commission. Contractors who routinely pull permits learn to budget extra time for design review. Neighboring cities like Arcadia or Monrovia largely avoid that layer. If your PGT units sit in a historic district, we plan the review into the schedule instead of discovering it mid-project. Call (844) 905-4587 to talk through your project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Pasadena
PGT makes durable windows and doors, but no product line is immune to a hot, dry climate and wind-driven rain. These are the problems we see most often on Pasadena homes.
- Hazy or cloudy panes on impact units. On WinGuard units, the seal around the impact glazing or the edge of the interlayer can fail after years of UV exposure. It shows up as a milky haze or a creeping cloud at the corner of the glass, and it’s most common on south- and west-facing elevations where the sun hits hardest. Once the edge seal goes, the seal is gone; the unit has to be re-glazed or replaced.
- Sliding glass door roller and track wear. WinGuard aluminum sliders start to drag, jump the track, or refuse to latch fully. The usual cause is flattened tandem rollers combined with a sill track packed with grit and grit-turned-to-sludge after the rainy season. It’s a mechanical wear problem, not a structural one, and it’s fixable without replacing the door.
- Weatherstrip, sweep and corner seal deterioration on vinyl frames. Vinyl weatherstrip hardens, sweeps flatten, and the mitered corners on the frame open up slightly over time. The result is drafts and water stains on the interior sill after wind-driven rain, especially during a Santa Ana event that pushes rain sideways. It’s the most common source of “my window leaks and I can’t see where” calls.
- Frame and sash distortion from heat gain. Vinyl profiles can bow, and sashes can rack out of square on older units. The visible symptom is a window that’s suddenly hard to operate or a latch that won’t line up. Pasadena’s hot, dry summers accelerate this, and a unit that was fine five years ago may now bind in the afternoon.
- Failed perimeter seals after roof or stucco work. When a roof is repaired or replaced near a window head, the flashing and sealant detail at the perimeter gets disturbed. If it isn’t re-detailed correctly, water finds the gap. We see this often enough that we check the window perimeter any time roof work happens on the same elevation.
If any of these sound familiar, it’s worth having the unit looked at before the damage spreads to the wall or the floor inside. Call (844) 905-4587 for a free estimate.
PGT Parts & Our Repair-vs-Replace Approach

We use OEM PGT hardware – rollers, sash locks, sweeps, weatherstrip and glazing beads – where it’s still available. The frame profiles are proprietary, and aftermarket rollers and latches tend to bind or fail early, so substituting them usually costs more in callbacks than it saves up front.
Here’s how we decide between repair and replacement. If the frame is sound, the glass is clear, and the failure is mechanical – rollers, track, sweep, latch, weatherstrip – repair is the right call, and it usually holds for years. If the vinyl is visibly bowed or the sashes are racked, or if the glazing itself has gone hazy, honest replacement of that unit usually beats chasing parts. We tell you which one you’re looking at, and we put it in writing. The written estimate sets the final price, so there are no change orders waiting for you mid-project.
Call (844) 905-4587 and we’ll take a look before you commit to anything.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We look at the unit in place: how it operates, whether the frame is square, how the weatherstrip and sweep are holding, and whether there’s water staining or air infiltration at the perimeter. On impact units we check the glass edge for haze and inspect the glazing bead. We also check the opening itself, because a lot of “window problems” are really rough-opening or flashing problems.
- 2
Repair or install. For repairs we pull the panels, replace the rollers and sweep with OEM-spec parts, clean and adjust the track, re-square the frame, and re-seal the perimeter. For replacements we set the new unit plumb and square, shim it properly, and detail the flashing and sealant so wind-driven rain sheds the way it should.
- 3
Test. We operate every unit through its full range, confirm the latch engages and the lock lines up, and check the sweep and weatherstrip seal with a feel test at the corners. On sliders we check that the panel sits flush in the jamb at both ends.
- 4
Warranty and handoff. We walk you through what was replaced, how to keep the track clean, and what to watch for. Our workmanship is covered in writing, and we document the repair so a future warranty claim on the unit stays clean.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Pasadena

We work on the PGT product types that show up most on Pasadena homes:
- PGT WinGuard Vinyl Series windows, including impact-resistant single-hung and casement units
- PGT WinGuard Aluminum Series sliding glass doors
- PGT Architectural Series casement and awning windows
- PGT ReliaGuard vinyl single-hung replacement units
Work ranges from a single failed roller to a full window replacement across an elevation. When a window replacement turns into a bigger job, the same contractor relationship covers roof repair and full kitchen remodeling, which matters because window replacement often exposes roofline and interior finish work that needs to be handled together. We coordinate those trades instead of handing you three phone numbers. Call (844) 905-4587 to talk through what you have.
Typical PGT Sliding Door Service in Pasadena
A Pasadena homeowner with older WinGuard vinyl sliders notices the doors drag, won’t sit flush in the jamb, and whistle in Santa Ana winds. The typical cause is flattened tandem rollers plus hardened weatherstrip and a silted-up sill track. A qualified local pro pulls the panels, replaces rollers and sweep with OEM-spec parts, cleans and adjusts the track, re-squares the frame and re-seals the perimeter. If the vinyl is bowed or the glass is hazy, the honest option is pricing a replacement door instead.
What PGT Work Typically Costs in Pasadena
These are typical estimated ranges for the work involved. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
Smaller repairs, like a roller and sweep replacement on a single slider, come in well under the replacement range. Call (844) 905-4587 for an exact quote. Estimates are free.
We Also Service These Brands
PGT is one brand on a much larger bench. Our kitchen work draws on KraftMaid cabinetry and Cambria and Silestone quartz surfaces, and bathroom projects use Kohler fixtures and finishes. We’re a multi-brand contractor, not a single-brand shop, so when a Pasadena project touches more than one trade you’re not juggling vendors. One contractor across every trade, from the driveway to the roofline. Call (844) 905-4587 for a free estimate.
FAQs – PGT Construction Service in Pasadena
No. We are an independent PGT service provider. We are not affiliated with, authorized by, or certified by PGT, and we don’t claim to be a PGT dealer. We repair, install and service PGT windows and doors with quality parts that fit them, and we tell you plainly when a unit is beyond what a repair can fix.
Yes. We use OEM PGT hardware – rollers, sash locks, sweeps, weatherstrip and glazing beads – where it’s still available, because the frame profiles are proprietary. When a part is no longer available, we source the closest correct-fit equivalent and tell you it’s a substitution rather than OEM. Call (844) 905-4587 to ask about a specific part.
Most single-unit repairs, like rollers, sweeps and weatherstrip, are done in a single visit. Window or door replacement depends on the number of units and whether the opening needs any repair behind the frame. If you’re in a Pasadena historic district, add time for design review before work can start. Call (844) 905-4587 and we’ll give you a realistic timeline for your project.
We cover PGT WinGuard Vinyl Series windows, WinGuard Aluminum Series sliding glass doors, Architectural Series casement and awning windows, and ReliaGuard vinyl single-hung replacement units. That includes repair, hardware replacement, re-sealing, and full replacement of the unit when the frame or glazing is too far gone to repair.
Not if it’s done correctly. We avoid frame modifications, don’t drill new drainage paths, and don’t substitute hardware that changes how the unit operates – those are the things that typically create warranty problems. We also document the repair so you have a record. If your unit is still under a manufacturer warranty, we’ll flag that before we recommend replacement.
Window replacement typically runs $4500 – $15000, roof repair $400 – $1800, and roof replacement $8000 – $20000, all as estimates. Single-unit repairs come in well below the replacement range. The written estimate sets the final price, and there are no change orders mid-project. Call (844) 905-4587 for an exact quote. Estimates are free.
Ask four things: whether they’re independent or claiming manufacturer authorization, whether they use OEM PGT hardware or aftermarket substitutes, whether they’ll pull a permit if the work requires one (especially in a historic district), and whether they’ll put the repair-versus-replace recommendation in writing with a fixed price. Ask how they’ll protect your existing warranty on any unit you’re not replacing. Call (844) 905-4587 and we’ll answer all four before you commit to anything.
Book Your PGT Service in Pasadena, CA
If your PGT windows or doors are dragging, leaking, hazy, or just not latching the way they used to, get a straight diagnosis and a written estimate before you decide on repair or replacement. Call (844) 905-4587. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written quote sets the final price.
Written by the team at Construction Pasadena.












