







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose CGI Construction
We provide independent CGI construction service in Pasadena, CA, working with CGI cabinetry and millwork from the first measurement through cabinet installation, refacing, and the countertop and backsplash packages that sit on top of it. What sets our CGI work apart is that we’re not tied to a single dealer’s catalogue, so we can tell you plainly when CGI’s box construction is the right answer for your layout and when a different route fits your space or your budget better. Construction Pasadena is a full-scope residential contractor with seven service lines, and our technicians have up to 12 years of experience in kitchens and bathrooms. To be clear about who we are: we’re an independent construction provider, not affiliated with or authorized by CGI, and we don’t speak for the manufacturer. Call (844) 905-4587 to book a free estimate on your kitchen or bath project.
Why Trust Construction Pasadena for Your CGI Construction?

CGI is cabinetry, and cabinetry fails in ways you can see before anyone opens a tool bag. Our technicians have handled enough CGI installs and refacing jobs to read those signs quickly: doors that rack instead of closing flush, a toe kick that gives slightly underfoot, laminate lifting along a top edge. That matters because the diagnosis is often the whole job. Get it wrong and you quote a full tear-out for a kitchen that needed one new box and a set of hinges.
We spec quality parts that fit CGI equipment. When a single damaged door or drawer front can be swapped, we order factory-matched replacements so the finish still reads as one kitchen. Where aftermarket soft-close hinges and full-extension glides outperform the originals without changing the look, we use those and say why. We also keep service warranty-safe: we don’t drill through a cabinet’s structural members for a quick fix, don’t mix water-damaged and dry panels in one run, and don’t re-hang doors on bent hinges that started the problem.
Pasadena work adds a layer most CGI service doesn’t have to think about. Historic district overlays mean a kitchen that touches exterior envelope or fenestration can trigger design review, so cabinet readiness and permit timing need to line up. We plan for that. For homeowners in Pasadena weighing refacing against replacement, that planning often decides the answer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Pasadena
- Swollen box panels at the toe kick and sink base. Particleboard and MDF swell when they get wet, and a sink base is where slow supply-line drips land. In older installs, the cabinet was never sealed at the cut edges, so water wicks into the panel and the toe kick begins to feel soft. By the time it’s visible, the box is usually compromised.
- Thermofoil and laminate door skins peeling or delaminating. These are pressure- and heat-sensitive materials, and they let go first where heat and steam hit hardest: the top edge nearest the dishwasher and range. Once an edge lifts, moisture gets behind the skin and the peel travels. This is the most common complaint we hear about CGI cabinetry in Pasadena kitchens.
- Drawer glides and hinges losing alignment. Years of heavy pot drawers wear glides and hinges unevenly. Doors start to rack and rub instead of closing flush, and what looks like a broken door is often a tired hinge or a glide that’s no longer square.
- Racked RTA boxes. Ready-to-assemble cabinets assembled with the wrong fastener, or without glue at the dowel joints, go out of square over time. Racked boxes mean doors that won’t sit flush against the wall no matter how carefully you adjust the hinges, and the fix starts at the carcass, not the hardware.
- Out-of-square walls in older Pasadena homes. A 1920s Craftsman kitchen or a mid-century tract home in east Pasadena rarely has plumb walls or a level floor. Cabinets installed without scribing and shimming to the actual wall will show uneven reveals and doors that catch at one corner. The cabinet isn’t defective; the install skipped a step.
CGI Parts & Our Repair-vs-Replace Approach

We choose parts the way we choose materials on any job: by fit and lifespan, not by what’s fastest to order. When one damaged CGI component can be swapped and the finish still matches the surrounding run, we spec factory-matched doors, drawer fronts and hardware. Where quality aftermarket soft-close hinges and full-extension glides beat the originals without changing the look, we’ll say so and use them. We don’t stock or carry genuine CGI parts, and we’re not a CGI dealer. We repair, install and service CGI cabinetry with quality parts that fit it, and we order what the specific job needs.
The decision rule is straightforward. If the boxes are sound and dry, refacing with new fronts is usually the honest call, and it costs far less than a tear-out. If carcasses have water damage or are racked out of square, replacement is the cheaper answer over a handful of years, because you’ll pay for the same repair twice otherwise. Call (844) 905-4587 for a free estimate and we’ll tell you which side of that line your kitchen sits on.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We assess the whole run, not just the offending door: check box panels for swelling, look behind the sink base for slow drips, test drawers and hinges, and check the cabinets against wall and floor with a level.
- 2
Scope and estimate. You get a written line-item quote covering only what the cabinets actually need, with the repair-versus-replace call explained. Estimates are free, and the written estimate sets the final price.
- 3
Repair or installation. Water-damaged boxes come out and get replaced; delaminated fronts get swapped for factory-matched CGI components; the run gets re-leveled, re-shimmed to the wall, and re-hung on fresh soft-close hinges so reveals line up. On refacing jobs, drawer-box and roll-out tray upgrades get spec’d as we go.
- 4
Test. Every door and drawer gets cycled open and closed. We check the reveals, confirm no hinge rub, and run water at the sink to make sure the tailpiece and supply lines aren’t the next slow leak.
- 5
Warranty-safe handoff. We note what was replaced and what was reused, so future service and any manufacturer warranty question has a record behind it.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Pasadena
We work with CGI cabinetry and millwork across the full kitchen and bath scope. That covers CGI ready-to-assemble all-plywood cabinet lines, common in rental and budget kitchen refreshes where the boxes need to be solid and the budget is fixed. It covers CGI pre-assembled and semi-custom cabinet lines with soft-close hardware and painted or thermofoil door styles. It includes CGI vanity cabinet lines paired with quartz tops in smaller Pasadena bathroom remodels, where a compact vanity has to fit around an older home’s plumbing wall. And it extends to CGI drawer-box and roll-out tray components spec’d as upgrades during refacing jobs, where the boxes are staying but the storage needs rethinking. We service, install and reface; we repair with quality parts that fit the product. Call (844) 905-4587 to talk through what your kitchen actually has.
We Also Service These Brands
CGI is one cabinet line in a much deeper bench. When a kitchen calls for KraftMaid or Wellborn cabinetry, or a countertop in Cambria, Caesarstone or Silestone quartz, we work with those brands too. The same goes for Kohler fixtures in the bath. That multi-brand reach matters because the honest answer to “can my CGI boxes stay?” sometimes ends with a different cabinet line over the top of them. You get one contractor across every trade, and material choices rather than material surprises.
Typical estimated costs for CGI cabinet and kitchen work in Pasadena
These ranges are typical for the Pasadena market and are estimates, not quotes. The written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
FAQs – CGI Construction Service in Pasadena

No. We’re an independent construction provider and are not affiliated with or authorized by CGI. We repair, install and reface CGI cabinetry using quality parts that fit the product, and we don’t claim factory training or certification. Call (844) 905-4587 for a free estimate.
Yes, in most cases. When one door or drawer front is damaged and the rest of the finish is intact, we spec a factory-matched CGI replacement and check the match against the neighboring fronts before it goes on. If the finish has aged unevenly, we’ll tell you upfront rather than install a door that reads as a patch. Call (844) 905-4587 and we’ll look at the run with you.
The boxes decide it, not the doors. If the carcasses are dry and square, refacing with new fronts is usually the honest call. If the panels are swollen from water or the boxes are racked out of square, replacement is cheaper over a few years. Call (844) 905-4587 for a free estimate and a straight answer on which you have.
Heat and steam. Thermofoil is a heat- and pressure-applied skin, and the top edge nearest the dishwasher and range takes the brunt of it. Once an edge lifts, moisture gets behind the skin and the peel spreads. Call (844) 905-4587 and we’ll confirm whether the door can be replaced or the run needs more.
Standard base cabinets are built for a quartz top in the usual counter thickness with a modest overhang at the front edge. The number that matters on your job is the actual cabinet depth and how level the run sits, because an oversized overhang on a shallow box puts stress on the panel. We’ll measure and confirm before ordering. Call (844) 905-4587 for a free estimate.
No, but the install has to be planned for it. Plumb walls and level floors are rare in a 1920s Craftsman bungalow or a mid-century tract home in east Pasadena, so the cabinets get scribed and shimmed to the actual wall rather than forced flush. Skipping that step is what causes uneven reveals. Call (844) 905-4587 for a free estimate.
Typical estimated ranges in Pasadena run $4,000 – $13,000 for cabinet installation, $2,000 – $6,500 for countertop installation, and $14,000 – $45,000 for a full kitchen remodel, with smaller scopes at the lower end. The written estimate sets the final price. Call (844) 905-4587 for an exact quote; estimates are free.
Book Your CGI Service in Pasadena, CA
If your CGI cabinets need a repair, a reface or a full replacement, start with a free written estimate. We’ll diagnose the boxes and the fronts, tell you which components are actually the problem, and quote the fix with named materials you can look up before you commit. Call Construction Pasadena at (844) 905-4587. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Pasadena.












