







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose ES Windows Construction
We provide independent ES Windows construction service in Pasadena, from fogged dual-pane units and dragging sliders to full window replacement and the bathroom and roof work that so often surrounds a window project. What sets our ES Windows work apart is how we read the unit: the label, the glazing package, the frame profile, the hardware. We are an independent service provider, not affiliated with or authorized by ES Windows, and we say so plainly. Our technicians have up to 12 years of experience with vinyl replacement windows, stucco-set retrofit frames and Low-E insulated glass. Call (844) 905-4587 for a free estimate.
Why Trust Construction Pasadena for Your ES Windows Construction?

ES Windows products are built for California conditions, and the installers who work on them get to know a specific set of details. We know how these units sit in a stucco wall, how their frames behave after a few hot summers, and how the hardware wears. That familiarity is what lets us repair rather than replace when repair is the right call.
We work with quality parts that fit ES Windows equipment by function: exact-fit insulated glass units with the same Low-E coating and spacer type, plus rollers, balances, latches and weatherstripping chosen for the frame profile. We don’t claim to carry OEM or genuine ES Windows parts, and we aren’t a dealer. What we do is match what the unit actually needs.
Warranty-safe practice matters here. Every ES Windows service we perform is documented so the homeowner keeps a clear record of what was done and why. If a repair could affect a manufacturer warranty, we tell you before we start. We are not factory-trained or certified by ES Windows, and we never imply otherwise. Our technicians have up to 12 years of experience, and they treat a $6,000 window wall with the same care as a single slider. Pasadena homeowners deserve a straight answer about what’s failing and what it takes to fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common ES Windows Construction Problems We Fix in Pasadena
Pasadena’s sun and occasional Santa Ana winds push hard on exterior glazing. These are the ES Windows issues we see most often.
- Failed IGU seals on dual-pane Low-E units. Haze, moisture or a cloudy film between the panes that no cleaning fixes. The seal on the insulated glass unit has failed, letting moisture into the space. The glass has to be replaced; the frame usually doesn’t.
- Slider and single-hung hardware fatigue. Worn rollers make a sash drag or bind. Balance springs stretch or snap on single-hung units, and latches stop pulling the sashes tight against the frame. Often the fix is hardware, not glass.
- Stucco-embedded retrofit frames that crack at the perimeter. ES Windows units are commonly set into stucco walls. Over time the perimeter can open, letting water track behind the flange and stain interior drywall near the sill.
- Vinyl frame and glazing-bead distortion on sun-exposed elevations. South and west walls take the worst of Pasadena’s summer heat. Vinyl can shrink or distort, which breaks the weather seal and lets air and water in.
- Patio sliding doors that no longer track straight. A heavy slider on tired rollers can jump the track. Left alone it wears the frame and strains the handle and lock hardware. Roller and track service restores smooth operation.
A common ES Windows scenario: a dual-pane Low-E slider on a sun-exposed wall starts showing a milky haze between the panes and the sash drags on worn rollers, so the homeowner thinks the whole window is shot. The usual cause is a failed IGU seal plus tired hardware. A qualified pro measures the unit, orders a matching glazing package, and either re-glasses and re-hardware the existing frame or replaces the unit if the vinyl or stucco flange is compromised. In a related pattern, water staining at the interior sill traces back to a cracked stucco perimeter or distorted glazing bead, which gets re-sealed and re-flashed rather than patched with caulk alone.
ES Windows Parts & Our Repair-vs-Replace Approach

We match parts to the unit by function, not by brand loyalty. A window needs a glazing package that matches the original Low-E coating and spacer, and it needs hardware that fits the specific frame profile. That’s how a repair holds up.
Our rule of thumb: if the frame, sash and flange are sound, re-glass and re-hardware. If the vinyl is distorted, the flange is compromised or the sash is cracked, honest replacement usually beats chasing rare parts. A pro should tell you which side of that line you’re on before any money changes hands.
We don’t stock or order OEM ES Windows parts, and we won’t pretend a repair is something it isn’t. What we will do is measure accurately, source quality parts that fit, and document the work. Call (844) 905-4587 for a free estimate and a clear read on repair versus replace.
Our ES Windows Service Process – Step by Step
- 1
Diagnose. We read the unit label, check the IGU for seal failure, test the rollers and balances, and inspect the stucco perimeter and glazing bead. We photograph what we find.
- 2
Repair or install. We order exact-fit glass or hardware, or plan a full replacement that matches the existing unit’s profile and glazing so the house stays consistent.
- 3
Test. After install we operate the sash through its full range, check the lock and latch, and water-test the perimeter seal where new flashing went in.
- 4
Document. You get a written record of parts and work, so any manufacturer warranty question has a clean paper trail. We explain what to watch for next.
See the difference
Before
After
Before
After
Before
AfterES Windows Products We Service & Install in Pasadena
We service and install the ES Windows product types Pasadena homeowners actually have on their walls: horizontal slider vinyl replacement windows, single-hung vinyl retrofit windows, vinyl patio sliding doors, and dual-pane Low-E insulated glass units. That means re-glassing a fogged unit, replacing worn slider rollers, resetting a binding single-hung balance, re-sealing a cracked stucco perimeter, and swapping a failed slider door. When a unit is beyond repair we install a matching replacement so the elevation stays coherent. The core sub-services around these projects include window replacement, full bathroom remodeling and roof repair.
We Also Service These Brands
We’re not a single-brand shop. Alongside ES Windows work, we handle KraftMaid cabinetry, Cambria and Silestone quartz surfaces, and Kohler plumbing fixtures, and we work across roofing systems, pavers and fencing from named manufacturers. That breadth matters on a multi-trade project. One contractor can coordinate the window replacement, the bathroom that sits behind it and the roof above it, so you’re not juggling three vendors. Brands you can look up before you commit.
FAQs – ES Windows Construction Service in Pasadena

No. We are an independent ES Windows service provider, not affiliated with, authorized by or endorsed by the manufacturer. We repair and install ES Windows units using quality parts that fit them, and we document our work so you have a clear record.
Yes. We match glass and hardware by function: exact-fit insulated glass units with the same Low-E coating and spacer, plus rollers, balances, latches and weatherstripping that fit the frame profile. We don’t claim OEM parts. Call (844) 905-4587 for a free estimate.
A hardware or re-glazing repair on a single unit often takes a few hours once the correct glass is on hand; a multi-unit window replacement or a bathroom or roof scope tied to it takes longer. We give you a timeline with the written estimate and set the final price there.
Horizontal slider vinyl replacement windows, single-hung vinyl retrofit windows, vinyl patio sliding doors and dual-pane Low-E insulated glass units. That covers re-glazing, hardware replacement, perimeter re-sealing and full unit replacement.
Not if it’s done correctly. We use parts that fit and document every step so you keep a clean record. We’re not factory-trained or certified, and we don’t speak for the manufacturer’s warranty, but our work is done to protect it. Call (844) 905-4587 for a free estimate.
Usually it can be repaired. A foggy or hazy pane is a failed IGU seal, and the fix is re-glazing the existing frame with a matching glass package. The whole window only needs replacing if the vinyl, sash or stucco flange is compromised. Call (844) 905-4587 for a free estimate.
Worn rollers and a track that’s out of line are the usual cause. The fix is replacing the rollers and adjusting the track and hardware, not replacing the window. We test the sash through its full range after the repair.
Often it’s the stucco perimeter, not the glass. A cracked stucco edge or distorted glazing bead lets water track behind the flange. We inspect the perimeter and re-seal and re-flash properly rather than patching with caulk. Call (844) 905-4587 for a free estimate.
Likely yes, and in Pasadena’s historic districts a window replacement can also trigger design review, including a Certificate of Appropriateness in areas like Bungalow Heaven and Prospect Park. Ask your city’s building department what your address requires. We can talk through the review timeline as part of the estimate. Call (844) 905-4587.
Yes. Matching the Low-E coating and spacer type keeps the elevation consistent and the performance even. We spec the glass to match the existing units. Call (844) 905-4587 for a free estimate.
Typical estimated ranges for the work that most often surrounds an ES Windows project:
| Service | Typical estimated range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Repair | $400 – $1,800 |
These are estimates, not a quote. The written estimate sets the final price. Call (844) 905-4587 for a free estimate.
Book Your ES Windows Service in Pasadena, CA
Fogged glass, a dragging slider or a leaking sill won’t fix itself. Tell us what’s failing and we’ll read the unit, explain repair versus replace, and put the numbers in writing. Call (844) 905-4587 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Pasadena.












