







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose CWS Construction
We provide independent CWS construction service in Pasadena, connecting homeowners with local independent professionals who install, repair and reface CWS cabinets, handle the surrounding kitchen scope, and keep the whole job under one project relationship. What makes our CWS work different is depth: the pros we route you to know the actual spec sheets, door and drawer hardware, and finish tolerances on CWS products because they handle them in Pasadena homes regularly. They know why a cabinet run binds, why a painted front checks near a range, and when a shim-and-refit beats a rip-out.
To be clear about where we stand: Construction Pasadena is not affiliated with or authorized by CWS, and we don’t act as its agent. We’re an independent provider, not a dealer, not a factory service arm. We work with CWS cabinetry and the kitchen, bath and roofing scope around it, then stand behind that work with written line-item quotes and licensed, insured trades. Our technicians have up to 12 years of experience.
Pasadena’s housing stock makes CWS installs here more interesting than in most of the San Gabriel Valley. Call (844) 905-4587 to talk through your kitchen or cabinet project. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Pasadena for Your CWS Construction?

CWS is a dealer-network brand, and that matters for how service works. The brand builds cabinets and sells them through dealers. It does not send installers to your kitchen. That’s why the person who hangs your CWS door, sets your drawer slides and shims the box is almost always an independent professional who has done it many times before. The pros we connect you with are exactly that, and they bring CWS-specific working knowledge rather than a playbook.
When a CWS box leaves the factory it’s square. The trouble usually starts on site, not at the factory. A wall that’s out of plumb, a floor with a dip, a soffit that isn’t level, a range alcove that was framed a little tight. Pros who know CWS know the tolerances these boxes need and plan for them before the first cabinet goes up. They also know which parts to use.
We use CWS OEM hinges, slides and touch-up products when they’re available through the dealer network. Where a CWS part is out of production, we match load ratings and mounting patterns with quality aftermarket soft-close hardware rather than forcing a mismatched part into a door that will bind six months later.
Warranty-safe practice is part of the job. Uninstalling a CWS cabinet to move a drain line, or cutting a box to fit a dishwasher, is done in a way that preserves the options you have if something goes wrong later. We document what we touched. Should a warranty question come up, you have a clear record of what was original and what was service work. No surprises on paper. Estimates are free and written before work starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Pasadena
CWS cabinetry is a solid product, and the issues we see aren’t brand failures so much as install-and-time realities. Here are the ones we run into most in Pasadena.
- Boxes racking and seams opening after a remodel. When a kitchen remodel moves a wall or resets a floor and the CWS cabinet boxes are shimmed but not re-plumbed, the frames twist. Doors that closed cleanly at install start to rub, seams go gappy, and the run looks tired long before it should. This is a leveling problem, not a cabinet problem. The fix usually starts with re-plumbing the run, not replacing it.
- Soft-close hinges and slides losing adjustment. After years of daily use, CWS soft-close hardware drifts. It’s especially common in kitchen corners where humidity and heat gather. A hinge that no longer self-closes, a slide that drags or won’t seat flush, a door that hangs a hair low on one side. Most of this is adjustable hardware and a re-hang. Sometimes it’s a part going bad.
- Door and drawer fronts warping or the finish checking near heat. CWS Shaker and Raised-Panel doors in painted or stained finishes don’t love a range or a dishwasher radiating directly at them. Without enough clearance from the heat source, a painted front can show finish checking or a subtle warp over a few seasons. Proper clearance and a heat break solve it at install. At repair time, a matched replacement front or a careful refinish is often all a sound door needs.
- Toe-kick and filler panels separating from the box. A CWS cabinet run installed over an uneven floor without a continuous shim and scribe strategy leaves toe-kicks floating. Filler panels pop their fasteners. The gap opens at the floor and the whole run starts to feel loose. A continuous shim plan and proper scribe closes the seam for good.
- Doors rubbing after a wall or floor shifts. Old Pasadena kitchens weren’t built to modern code tolerances, and a wall that moves over time will close a gap that used to be open. A CWS door that suddenly rubs on a neighboring front is usually telling you a wall, a floor or the cabinet frame has shifted. Re-hanging and re-plumbing the affected run is the real fix.
If you recognize any of these, it’s worth an on-site look before assuming the fix is a full replacement. Call (844) 905-4587 for a free estimate.
CWS Parts & Our Repair-vs-Replace Approach

Our stance on parts is simple. Use CWS OEM parts when they fit and are available through the dealer network. Use quality aftermarket hardware that matches load rating, mounting pattern and finish when a CWS part is out of production. Never force a mismatched part. When we use aftermarket hardware on a soft-close slide or hinge, we match the throw, the return and the mount so the door closes the way the CWS design intended.
The repair-or-replace decision rarely turns on a single door. It turns on the boxes. If the CWS boxes are square and dry, a door or drawer problem is a hardware and re-hang job. If the boxes have racked badly, if water has gotten into an all-plywood box, or if the finish has failed across the run, replacement starts to make sense. Water-damaged cabinet boxes are almost never worth repairing. Sound boxes with a peeling finish usually are. We scope both and write it up line by line, so you can see what you’re paying for either way.
Want a straight answer on repair versus replace for your CWS kitchen? Call (844) 905-4587. Estimates are free.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We walk the kitchen with you. Doors that rub, drawers that drag, finish problems, out-of-plumb walls, evidence of water at the boxes. We check CWS hardware condition at hinges and slides and identify whether the issue is install, hardware age or a shifted wall.
- 2
Repair or install scope. For a repair, we re-level and re-shim the run, re-hang CWS doors and adjust slides, replace drifted hardware with matched parts, and re-secure toe-kicks and fillers. For an install, we plan shim lines, scribe strategy and heat clearance for the range and dishwasher before the first box goes up.
- 3
Test. Every door gets opened and closed across its full swing. Every drawer gets pulled and pushed. Self-close functions are verified. Gaps are checked at the reveal. If a countertop is going on, we confirm the cabinet plane is flat before it’s set.
- 4
Warranty and record. We document what was serviced, what was original and what was replaced, and leave you with a written record. That record is what you’d want in hand if a warranty question comes up later, and it’s part of the workmanship warranty we provide on installation.
Most CWS cabinet service visits in Pasadena wrap in a day or two depending on how much of the run needs adjusting. A cabinet-only install is usually a few days on site. Call (844) 905-4587 to schedule a free estimate.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Pasadena

We work across the CWS cabinet line as it shows up in Pasadena kitchens. That includes framed full-overlay boxes in the CWS ALL-STAR Series in Maple or Oak, the Value Line and Assembled-in-USA all-plywood box cabinets, and the Shaker and Raised-Panel door styles in painted or stained finishes. We handle soft-close drawer and door hardware packages and cabinet refacing on sound boxes where the fronts are the only problem.
Around the cabinets, we cover the scope that makes a CWS kitchen work: kitchen design and layout, quartz and granite countertops, backsplash, island installation, and the plumbing, electrical and roofing work that ties into a kitchen project. When a CWS job needs a new countertop, we coordinate the cabinet plane so the new slab sits flat. When it needs electrical for an under-cabinet light or a new outlet, it falls under the same project relationship.
We Also Service These Brands
CWS cabinetry is one point on a wider bench. We also work with KraftMaid and Wellborn cabinets, Cambria and Silestone quartz surfaces, and Kohler fixtures, so a kitchen or bathroom that mixes brands isn’t a coordination problem for you. If you’re comparing a CWS line against a KraftMaid line, or Cambria against Silestone for your countertop, we’ll scope both and let the specs and the budget make the call. Brands you can look up before you commit, installed by pros who work with them.
FAQs – CWS Construction Service in Pasadena
No. Construction Pasadena is an independent provider, not authorized by CWS and not acting as its agent. We connect you with local independent professionals who work on CWS cabinetry and the surrounding scope. Service is not factory-authorized, and our technicians are not factory-trained or certified by CWS. Call (844) 905-4587 for a free estimate.
Yes. We use CWS OEM hinges, slides and touch-up products where they’re available through the dealer network, and matched aftermarket soft-close hardware when a CWS part is out of production. In each case, we match load rating, mounting pattern and finish so the fit is right. We don’t claim to stock OEM or genuine CWS parts on hand. Call (844) 905-4587 and we’ll scope your hardware.
Most CWS cabinet service visits in Pasadena take a day or two, depending on how much of the run needs re-shimming or re-hanging. A cabinet-only install is typically a few days on site. Jobs that pull in a countertop or backsplash add time. The written estimate lays out the schedule before work starts. Call (844) 905-4587 to schedule.
We cover CWS cabinet boxes across the ALL-STAR Series and Value Line and Assembled-in-USA all-plywood boxes, Shaker and Raised-Panel door styles in painted or stained finishes, and soft-close drawer and door hardware packages. We handle new installs, refacing and cabinet repair. We don’t cover CWS products outside the cabinet line.
Not inherently. Whether a specific service affects your CWS warranty depends on what’s done and how. We do the work in a warranty-safe way: no cutting a CWS box to fit a drain line without a plan, no moving a cabinet in a way that undermines the structure, and we document every service in writing so you have a clear record for any future warranty question. Talk to us before we start, and we’ll tell you what to expect.
Typical estimated ranges for CWS kitchen scope in Pasadena are below. These are estimates, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Call (844) 905-4587 for an exact quote. Estimates are free, with a written line-item scope.
Yes, in most cases. A cabinet-only job is routine when the existing countertop can be safely detached and reset, and when the new cabinet heights match the old plane. If the countertop is a fragile stone or has been set with adhesive in a way that makes removal risky, we’ll flag it before work starts. Call (844) 905-4587 to scope it.
Usually a service call. Soft-close hardware drifts with use, and the fix is adjustment or hardware replacement, not a warranty event. A warranty claim is more likely if the failure is premature and clearly a defect in the part itself. We can look at it and tell you which side of the line it falls on. Call (844) 905-4587.
A straight cabinet swap usually doesn’t. A cabinet install that touches electrical, plumbing or structural work may require a permit, and HERS verification depends on what else is changed in the kitchen. Whether your project triggers historic review depends on your neighborhood. In Bungalow Heaven and Prospect Park, the city’s historic district overlay means even a window replacement or fence repair may require a Certificate of Appropriateness from the Design Commission, and Pasadena’s multiple historic districts and landmarks like the Greene & Greene masterpieces are reviewed with real scrutiny. We pull permits and coordinate inspections as part of the job, and we budget the extra design review time into the schedule. Call (844) 905-4587 to talk through your specific scope.
The CWS Value Line and Assembled-in-USA all-plywood boxes in a Shaker door style are the practical choice for small kitchens. Framed full-overlay in the ALL-STAR Series works when you want maximum face area per cabinet and a tighter reveal. The fit comes down to your layout and how much storage you can pull from a small footprint. We’ll scope both against your wall measurements. Call (844) 905-4587.
Yes. Refacing is the right call when the CWS boxes are square, dry and plumb but the doors and drawer fronts have failed. We replace the fronts with a matched door style, swap drifted hardware for matched soft-close parts, and leave the boxes in place. It costs less than a full replacement and looks close to new. Call (844) 905-4587 to scope it.
Book Your CWS Service in Pasadena, CA
Whether you’re re-shimming a tired CWS run, refacing sound boxes, or designing a full kitchen around new CWS cabinets, we’ll connect you with an independent Pasadena pro who knows the product. Call (844) 905-4587. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written quote comes before any work starts.
Written by the team at Construction Pasadena.












