







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Pasadena Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction and service in Pasadena: cabinet installation, refacing, repairs, and full kitchen work built around KraftMaid’s semi-custom lines. What sets our KraftMaid work apart is that we know where these cabinets actually fail after years of daily use, and we fix those specific points instead of quoting a full replacement. We work on everything from Vantage and Prelude to Sonata and Winslow.
Construction Pasadena is an independent contractor. We are not affiliated with, authorized by, or a dealer for KraftMaid. We install and repair their cabinets using quality parts that fit them, and we’re upfront about when a repair stops being worth it.
Pasadena kitchens sit in some of the most scrutinized housing stock in the San Gabriel Valley. Craftsman bungalows in Bungalow Heaven, Period Revival homes near Orange Grove Boulevard, and mid-century ranches on the east side all present different cabinet conditions, and older homes here often carry knob-and-tube wiring and settling walls that change how box cabinets land on a floor. Call (844) 905-4587.
Why Trust Construction Pasadena for Your KraftMaid Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent inside KraftMaid cabinet boxes: reading the hinge plate, checking whether a glide is worn or a screw has stripped, and knowing the difference between a door that needs a new hinge and a box that has lost its structural grip. KraftMaid’s semi-custom construction means the boxes are built to be adjusted; the wear shows up in the moving hardware long before the frame fails.
We buy quality parts that fit KraftMaid equipment. When OEM hinges, glides, and shelf clips are available, we use them because they preserve fit and finish. When hardware is discontinued, we match equivalents rated for the cabinet’s door weight and thickness instead of forcing something that will pull out again in a year.
Warranty-safe practice matters here. We don’t drill new holes where a fill-and-redrill will do, we don’t cut into the box to solve a door problem, and we don’t void factory coverage with improvised modifications. If a cabinet still falls under a manufacturer warranty, we tell you before we touch it. You get a written line-item estimate, and the price is set per job by that estimate.
These habits carry across every KraftMaid job in Pasadena, from a single drawer bank to a full kitchen rebuild.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Pasadena
The failures we see on KraftMaid cabinets are consistent. They’re almost always hardware and finish problems, not structural ones, which is why so many can be repaired instead of replaced.
- Drawer glide failure on Vantage and Prelude lines. Side-mount epoxy-coated glides wear through their coating after years of use, and the drawer starts to stick, drag, or sag on one side. The glide is the wear part, not the box, so replacement restores smooth travel without touching the cabinet frame.
- Door hinge screw pull-out. Particleboard and plywood box material strips at the hinge locations, most often on wide or heavy doors that load the screws hardest. The door then hangs unevenly and rubs. Filling and re-drilling the screw holes with proper support usually solves it.
- Finish wear at high-touch points. Painted or stained finishes on maple and cherry doors chip or fade near knobs and along edges where hands land. It’s cosmetic, but it’s the most visible problem in a well-used kitchen, and the dry Pasadena summers push wood movement that stresses those edges.
- Shelf sag in wall cabinets. Adjustable shelves bow under heavy loads when standard 5/8-inch shelves are used without mid-support. Heavier dishes and small appliances make it worse. Adding mid-support or upgrading shelf thickness fixes it.
- Water damage and swelling at the sink base. Slow leaks and splash exposure swell the box and lift the finish. This one is different from the rest: when the box itself has swelled or softened, repair stops making sense and replacement is the honest answer.
KraftMaid Parts & Our Repair-vs-Replace Approach

We choose parts by fit, not by label. OEM KraftMaid hinges, glides, and shelf clips are our first call when they’re available, because they match the cabinet’s original drilling and keep the door reveal even. For discontinued hardware, we match aftermarket parts by weight rating and door thickness so the replacement holds.
Repair is usually the right call when boxes and doors are structurally sound. Rehardwaring and refacing can extend a KraftMaid kitchen for years. Full replacement makes more sense when water damage has softened a box or several hinges have failed at once, which points to broader material condition rather than one worn part.
A typical KraftMaid call in Pasadena is a Vantage kitchen where drawers no longer glide smoothly and doors hang unevenly after a decade of daily use. The cause is almost always worn side-mount glides and hinge screws that have stripped out of the box material, not a failed frame. A qualified pro replaces the glides, fills and re-drills the hinge holes, and realigns the doors, and function comes back without new cabinets.
Call (844) 905-4587 for a free estimate on your KraftMaid repair or reface.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open the cabinets, check each hinge plate and glide, test drawer travel under load, and look at the box for swelling or stripped screw locations. You get a clear finding on what’s worn and what’s sound.
- 2
Repair or install. For repairs, we replace glides and hinges and re-drill stripped screw holes. For installation, we set KraftMaid cabinets level and plumb, shim the boxes, and align doors and drawers so reveals stay even. Countertops and backsplash follow.
- 3
Test and adjust. Every drawer gets cycled loaded, every door opened through its full swing, and every hinge adjusted for the final reveal. We check that the finish at high-touch edges is intact.
- 4
Warranty. We leave you the written estimate and a record of the parts used, so any later service or manufacturer warranty conversation starts from a clear baseline.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Pasadena
We service and install KraftMaid semi-custom cabinetry across the full kitchen: base cabinets, wall cabinets, drawer banks, pantry units, and the door and drawer fronts that take most of the daily wear. We handle cabinet installation and refacing, kitchen design and layout for KraftMaid lines like Vantage, Prelude, Sonata, and Winslow, and quartz and granite countertops to finish the space. If you’re weighing a small refresh against a full remodel, we’ll tell you which one the cabinets actually need. We don’t stock cabinets; we work with what you choose and what’s already in the room.
We Also Service These Brands
KraftMaid is one line. If your project calls for something else, we work with Cambria, Silestone, Kohler, and Toto, which means one contractor can carry a kitchen from cabinets to countertop to fixtures. That matters on a remodel where the sink, faucet, and counter edge all have to agree, and it means you’re never held to a single brand to get the job done.
FAQs – KraftMaid Construction Service in Pasadena

Is Construction Pasadena authorized by KraftMaid? No. We are an independent KraftMaid service provider and are not affiliated with, authorized by, or a dealer for the manufacturer. We install and repair their cabinets with quality parts that fit them.
Can you replace just the drawer glides on KraftMaid Vantage cabinets? Yes. The Vantage line uses side-mount glides that wear out with use, and replacing those glides is a normal repair that doesn’t touch the cabinet box. Call (844) 905-4587 to schedule an estimate.
My KraftMaid cabinet doors are sagging at the hinges – can this be fixed without new doors? Usually, yes. Hinge screw pull-out in the box material is the common cause, and filling and re-drilling the screw holes with proper support brings the door back to alignment. Call (844) 905-4587 and we’ll tell you if new doors are actually needed.
Is it worth refacing KraftMaid cabinets instead of replacing them? If the boxes and doors are structurally sound, refacing or rehardwaring can extend the kitchen for years and costs far less than a full cabinet replacement. Water damage or several failed hinges points the other way. Call (844) 905-4587 for an honest read on which applies.
What’s the typical cost to install new KraftMaid cabinets in a Pasadena kitchen? Cabinet installation typically runs $4,000 – $13,000, countertops $2,000 – $6,500, a small kitchen remodel $9,000 – $20,000, and a full kitchen remodel $14,000 – $45,000. These are estimated ranges, and the written estimate sets the final price. Call (844) 905-4587 for an exact quote; estimates are free.
Do you use OEM KraftMaid parts for repairs? We use OEM hinges, glides, and shelf clips when they’re available, and equivalent aftermarket parts rated for the cabinet’s weight and door thickness when they aren’t. Call (844) 905-4587 to talk through your repair.
KraftMaid Pricing in Pasadena
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Book Your KraftMaid Service in Pasadena, CA
Whether it’s a drawer that won’t glide, doors that hang unevenly, or a full KraftMaid kitchen install, we’ll give you a written line-item estimate and tell you honestly if a repair or reface will solve it. Call (844) 905-4587 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Pasadena.












